HOW TO KNOW THE SENDER'S LOCATION OF THE EMAILS YOU GET

On daily bases, millions of spam messages are being sent over the internet so much so that it could be possible one just entered your inbox while reading this post. The Next thing that comes to mind is knowing "who is actually the sender". Sometimes these emails are being sent anonymously over the web while others are sent through the senders original IP address. The mails you receive as spam sometimes does not fully decipher the sender but actually carries few information on who the Sender really is or the IP address of the sender.

How to Find Sender's IP address in Hotmail
1. Log into your Hotmail account with your username and password.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail.


5. If you find a header with X-Originating-IP: followed by an IP address, that's the sender's IP address Hotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9. 6. If you find a header with Received: from followed by a Gmail proxy like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9. 7. Or else if you have headers like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9. 8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.9. Track the IP address of the sender

HOW TO FIND THE SENDERS THROUGH IP ADDRESS IN MESSAGE HEADER IN GMAIL

How to find the IP address of the sender in Gmail: When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.

Finding IP address in Gmail:
1.Log into your Gmail account with your email address and password.
2. Go to your inbox and open a mail.
3. To show the email headers, Click on More options on that mail thread. You should get a massive bunch of links displayed. Click on Show original.

4. Next you would get headers like this:Gmail headers : nameLook for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is65.119.112.245.That should be the IP address of the sender!
5. Track the IP address of the sender. by going to site like whatismyipaddress.com

You May also Like:

HOW TO CHANGE YOUR IP ADDRESS ON FIREFOX

HOW TO CHANGE YOUR IP ADDRESS ON GOOGLE CHROME WITHOUT ANY SOFTWARE

HOW TO LOCK DOWN AND SECURE YOUR PC WITH PREDATOR

This post is about an unsual way to use your USB mass storage device as a tool to secure and lock down your computer for restricted access. Here, your USB mass storage serves a the key to unlock and lock down your PC. Once it is inserted into your Pc It automatically unlock your pc and when once removed, it locks down in a couple of micro seconds. Whether you like it or not a good security measure Is something everyone needs to pull by the side when dealing with anything in this life.

To do this little trick, I will be introducing to you a window application called PREDATOR that helps you to do this. Predator is the window application you need if you are the security conscious type. It prevents others from hacking into your system files when you are not available. It's more convenient than closing your Windows session, if you ever have to and does not require you as an authorize user toretype your window password when you return.

KNOW HOW IT WORKS

Now let me come down to how this very little shit works.

• Like I said earlier Predator helps you to lock down your Pc/laptop when you remove your USB flash (mass storage Device) while your widows session is still running by darkening your window screen and making your PC/laptop key board and mouse to become totally inactive for anyone or any unauthorized user.
• One wonderful thing about this application is that it also helps as a tracker and keeps activity logs that enables you to know people who made attempt to use your computer.
Predator also helps you to set an alarm that keeps away or freak out intruders. Maybe you're are in a public place operating your Device and at the same time you have a "here and there" movement to do within that area, instead of getting so worried about who to look after or watch out for you PC, just relax and and keep your ears alert to hear an alarm when someone touches it and that's all.
• Predator also disables ALT+CTRL+DEL on your system, this make it very hard and rigorous for for anyone who is up for a fast one to terminate and kill program process through TASK MANAGER in which predators will certainly happen to be among them.
• Now come to think of if what if your USB mass storage gets missing... Yes it may happen but then you can still access your Pc with a special Password that you must Have created at the time of installing predator on your system. All that I am going to explain later On in this Post

System Requirements for Installing predator

PREDATOR is availble on the following operating systems:
32-bit based systems
Windows 8 (all editions)
Windows 7 (all editions)
Windows Vista (all editions)
Windows Server 2008
Windows Server 2003
Windows XP SP3 (all editions)
64-bit based systems
Windows 8 (all editions) 64-bit
Windows 7 (all editions) 64-bit
Windows Vista (all editions) 64-bit
Windows Server 2008 x64
Windows Server 2003 x64

PREDATOR will not work with other versions of Windows than those indicated. If the Microsoft .NET Framework 4 Client Profile is not installed on your computer, the PREDATOR installation program will do it for you.

Download Predator forWIN 32Bit and WIN64bit

HOw To Install Predator

1. Download Predator free edition InstallPredator.exe and Install it in your PC.After installing run the application from Windows program menu or the desktop shortcut icon.
2. You will get a message box like this Insert your USB flash drive and click OK to continue.
3. Now the preference window will appear. Here you can set the screen darkness,start-up mode,and other options by checking in the check boxes.
4. In the Change Password field put your new password when you are configuring 1st time. Select the Drive letter in your computer which indicates the USB drive of your computer. Now press “Create Key” button and it will successfully create the key file in your USB flash drive.
5. Now click OK.
6. Check in the system tray.If the Predator icon is blinking then everything you have done is OK an ready to lock your PC.

STARTING OFF WITH PREDATOR

To get started with this trick to lock down your PC for security purpose, all you have to do is adhere to all the steps Given below

To start monitoring your PC
Insert your key Run the software via the Start Menu / Programs / Predator item or via the PREDATOR icon on the Desktop Make sure that the PREDATOR icon flashes in the taskbar

When you go away
Look at the PREDATOR icon in the taskbar: if it is red, wait. If it is green and blinking, remove the key.
The desktop will be locked in a few moments, depending on the settings you have chosen. If somebody tries to use your PC, PREDATOR shows the password dialog and starts a countdown.
If an invalid password is entered, PREDATOR sounds an audible alarm and displays a blinking Access Denied sign.

When you're back
Insert the key. The desktop will be unlocked in less than a second. If somebody has tried to use your PC, PREDATOR automatically opens the Log window and shows the failed access attempts

To stop monitoring your PC, temporarily or permanently
Click on "Pause monitoring" or "Exit" from the context menu

To verify or tell if someone tried to used your PC while you were away,
Click on "View log" in the context menu and see all logged activities.

FAQ:

Can I make a copy of my USB drive and give it to someone else to use on my PC ?
No, you can't make a simple copy because PREDATOR has a unique copy-protection scheme: if someone tries to copy a PREDATOR key, the copied key will be useless. If you need several flash drives to protect your computer, you must prepare them with the "Flash Drive" section of the Preferences window. For instance you can make a spare key to unlock your computer in case you lose your main key, or you can give their own keys to some trusted persons to allow them to use your PC. Return to FAQ's main index

What is the minimum size of the USB drive needed to operate PREDATOR ?
Any USB drive size will just be okay do so long as PREDATOR finds a 1KB free space to writes its protection codes and can be found on the USB Drive as "predator.ctl" and is located at the root of the drive.
What if I lose/break my key ?
This may be very risky. Its like locking your room and swallowing the Key Up(.....wondering where u r going to lay ur head to rest for that day). Now if this ever happens, then Run Predator, and wait for the screen to go blank, click anywhere on the screen with the left mouse button, then press the Enter key 3 times to display the password dialog box
Kindly type your password as required to enable you have access once again
Insert a new flash drive (mass storage Device)
Right-click the PREDATOR icon found on the taskbar and click the Preferences item Prepare your key as shown in the paragraph USB Flash Drive in the Settings page. And that's all.
What if I forget my password?
Run PREDATOR as Administrator and click the "Reset Password" button, to reset your password,
After that kindly Click the close button to quit the program

You can click here for more Info about Predator Here!

HOW TO SEND FREE TEXT ON MTN

From the Stables of Browsingcheat.blogspot.com I bring to you the latest trick on How to send free text messages on MTN-Nigeria. May be you're the only one yet to know about this simple free cheat. Anyway count yourself lucky to have stumbled upon this post. This Trick has been in use since the beginging of this week and has been the bomb and the rave of the moment in sending free SMS text message.

Now to do this trick without too much grammar, ADD a + sign on the receiver's Phone Number and type whatever you have to type. For example I want to send a message to this number 08100667966, all I have to do is add a plus sign to the receivers number and it becomes +08100667966

Thats all!

So this is what you have been missing all this while.
You can use your Mtn number to text to plenty of your friends and family on other networks using this simple trick.

That's my number I used in the Example you Can send a free Thank you Message If it Works or click the facebook Like or share button to share with friends. You can equally drop your regards in the comment box too...

WHAT YOU NEVER KNEW ABOUT YOUR IMEI NUMBER

Does My IMEI Number Mean Anything

Yes it really means a lot if you dont know. Is too Bad that most NIGERIANS and many others out there don't know sincerely the significance of their IMEI number. They see it more often as a mere number that comes along with the goody bag. The only few who knows little about it erroneously thinks that the first five or six numbers are just encoded representation of the location where the phone was manufactured and assert it to it as being a predisposing factor to low quality product that comes from such location.

Lets get it straight here. know that the location of the manufacturer is not encoded into your mobile phone IMEI number, the funny thing here is that, Not even your phone manufacturer assigns IMEI number.Most of these mobile phone manufacturer receive IMEI numbers from external regulatory body.

THEORETHICAL EXPLANATION OF YOUR IMEI NUMBER

Theoretically the first two(2) digits ***(..i.e. 35) represent the National Association or regulatory body that assigns the IMEI number, though in practice the worldwide GSM Association now issues all IMEIs and shows the British Approvals Board of Telecommunications, though all IMEIs in the world currently begin 35...
The details that accounts for all IMEIs ever since 1st -Jan- 2004 are as follows:
The next six digits discloses the device type for example, 640602 is a Nokia N96, 808201 is a Nokia N82;etc.) - this together with the first two numbers are called the Type Allocation Code (TAC).
The rest six digits are unique serial number assigned to a particular device and are commonly known as "check-digit". No two mobile phones have the same Check digit.

And So...

And so also take note that, not all N96s have that IMEI series, high-volume sellers might move to a new IMEI series when one is exhausted, or the manufacturer could have different device variants using different IMEI series (such as N95-1, N95-2, N95-3...).(does that makes some sense to you?...)

Back then when mobile phones started making trends in communication it was very common and likely for an IMEI number to have seventeen digits, the last two digits probably encoded as "software version" - right now things have changed since there is a constant change of software version can be updated, even before we could update our phones ourselves.

This is a useful page for information on IMEI numbers:

You can check here for more http://www.gsm-security.net/faq/imei-international-mobile-equipment-identity-gsm.html

MUST READ: UNLOCK HUAWEI AND ZTE MODEM AND INSTALL NEW FIRMWARES AND DASHBOARD

It feels so bad knowing that your modem cannot accept any SIM inserted into it. This normally happens when you exhaust the given number of unlock attempt (normally 10 attempts). In my case I exhausted all the 10 unlock attempt allotted to my Huawei E173 modem. I “Googled” the living daylight out of my computer finding a reasonable solution but I got frustrated the more.

Things finally began to make head way the moment I stumbled on this two great software that helped me in flashing and re-installing my modem firmware and reset my modem counter. But it didn’t stop there. Then I tried other tricks which I am going to explain right away in this tutorial section. This trick Unlocks all

Huawei

[ B970, D100 E122, E150, E153, E1550, E1552, E1553, E1556, E156, E156, E158, E160, E161, E1612, E169, E1690, E1692, E170, E172, E173, E1731, E1732, E177, E1750, E1752, E1756, E176, E1762, E180, E1820, E2010, E219, E220, E226, E230, E270, E272, E367, E372, E510, E583c, E5830, E5832, E5832s, E585, E612, E618, E620, E630, E660, E800, E870, E960, EC121, EC122, EC1260, EC1261, EC1262, EC150, EC152, EC168, EC226, EC321, EC325, EM770, ETS2205, ETS2208, ETS2222, ETS2258, K3520, K3565, K3715, K3765, K4505, R201, UMG169, UMG181, ]

and

Zte

[ MF100, MF102, MF110, MF112, MF170, MF180, MF190, MF30, MF332, MF612, MF616, MF620, MF622, MF626, MF627, MF628, MF631, MF632, MF633, MF635, MF636, MF637, MF638, MF645, MF656, MF662, MF663, MF668, K3520-Z, K3565-Z, K4505-Z, ] .

STEP 1

First before we get started, download this software I have with packaged here. It’s a zip file Unzip the zip file with any unzipper (you can check out for popular ones like win winrar, available for 36 and 64 bit users) or any zip software to extract the file content

STEP 2

- run the .exe file inside the zip folder,

STEP 3

- Click on the Refresh button to automatically detect and unlock your Huawei modem. Don’t forget to check the AUTO CONNECTION in the connection mode area. You Can check out the photo below to see exactly what I mean

STEP 4

- Take note of the second arrow labeled “2” to make sure that Auto-Calc Code and Auto-Unlock Modem are checked too

STEP 5

- Next you should click READ MDM DATA button

STEP 6

- You can Now click the UNLOCK button to unlock your modem automatically. Clicking the Unlock button also helps you to reset the unlock attempt counter back to it default state (0/10 unlock attempt. Varieties of

But Hey! Wait!!!. Not so fast.

One more action is need to flash the modem Without wasting time click on Calculate button on the left side of the software to generate the flash code. Sure you’re gonne need it later.

Related Post:

• HOW TO UNLOCK THAT STUBBORN HUAWEI or ZTE MODEM
• HOW TO USE YOUR IPHONE AS A 3G MODEM
• HOW TO INSTALL GLO BOLT MODEM
• HOW TO USE YOUR BLACKBERRY AS A MODEM
• HOW TO CONNECT YOUR NOKIA PHONE AS A MODEM

Tips on How to Unlock ZTE or huawei Modems Easily

1. Follow the below steps if you wish Upgrade your Modem Firmware
2. First, we are going to download the right software to help us to this without a hitch. Please note You must download the right firmware for your modem or else it won’t work. You can download it from their official website but I prefer and recommend dc- files.com
3. - Select Huawei or whatever model your modem is and click the little modem icon by the side


4. Next page you’ll see will let you pick from a dropdown list the model of your modem. So select your modem model and click the same modem icon next to it. In this case we are selecting Huawei E156 for this unlocking tutorial.

5. Now, its time to download and update our Firmware and Dashboard. You can see the image below to see options available


6. Now to update the firmware, just simply unzip the firmware update you downloaded and install the “.exe file.” Like you would do to any windows program.
7. Accept the agreement and proceed.
8. Wait while the wizard searches for your modem. Just calm as this should only take your few seconds
9. On the next page, simply hit the Next button to begin the upgrade of your Huawei E156 firmware Data Card
10. Now listen up carefully. You just successfully reached the flashing stage of your Huawei Modem. Kindly make yourself comfortable while you wait for the whole process. This takes up to about 30mins or less.
11. You can do some coffee while you stay chilling.

- Don’t hit the start button yet,

.

Do take note of the warning messages that appears on the screen before proceeding to flash your modem. You may be prompted to enter your modem flash code if necessary.

Remember

I told you earlier you would need it as we proceed. Well this normally occurs when your new firmware version differs or is not compatible with the current one you’re about to install on your device.

Enter the flash code as shown in the image above. Flashing should start automatically, and it normally takes less than 10-15 minutes and allow the wizard to update your modem firmware.

At this point, you should see a message that says Update Success!.
The message displays your modem new FIRMWARE version and IMEI respectively. See the image below

You can now smile to yourself for a successful hitch frees Modem Firmware Upgrade!

How to install a new Zte or Huawei Dashboard on your Modem

After a successful firmware upgrade, you may be so eager to start trying out SIM cards from the all different network provider you know. Well let me not laugh at you yet (although I just did). You may still get that frustrating message you get when you insert the different network SIM. The reason is beacause , the default Dashboard is programmed to pop out an error message and disable sim detection when a different network sim is entered.
Not to worry I will show you everything you need to know to stop seeing this message.

The Hard Job Here [sorry just kidding] is to Update our Dashboard

1. Simply unzip the Dashboard file I told you to download before. A list of them include Huawei, Zte, Novatel, Sierra Wireless, Samsung, BandRich, Alcatel, alfa, and Vodafone. So just select the modem type you wish to unlock
2. - Unzip the file and run the executable file
3. - Accept the agreement and continue

4. - Again, the software should search for your device
5. -Hit the Next button as before and the procedure is very much similar to the firmware upgrade you did earlier.

Now check this out, it more like a child's play unlocking Modem and re-installing /upgrading the firmware, Is that not?

Now, just know that this is the only way for now that you can use to recover your 10 wrongly entered unlock attempts. You can save or bookmark this page to go over it more often for a step by step guide on how to unlock and update modem dashboard and firmware on HUAWEI and ZTE.

Just help me do a click on like button if you like this tutorial. You can drop comments if it works. in that way I get encouraged.THankS!!!

HOW TO INSTALL GLO BOLT MODEM ON PC

Modem InstallationFIRST TIME ACTIVATION

I guess you just bought a new Glo modem and you are also ready with a Glo prepaid SIM also Insert the GLO SIM in the SIM slot inside the modem, and then make a direct connection of the modem to your device(desktop,laptop e.t.c).

Just take a few seconds (lets say 0-30 seconds)to wait and allow the "folder-like" dialogue box to pop up on your device screen or better still dash to “My Computer” (shortcut key Win + E) and double click the glo dongle icon you see Click on the “RUN.AUTO.EXE” in the folder to install the modem on the PC and stick to instructions on the wizard dialogue boxes.

• you see a pop-up that the device is fully installed and ready to use, then switch over to double-click on the Glo icon on your desktop
• Watch out for the Glo network signal icon to show up right at the left bottom corner of the Glo software interface/Graphic User Interface (GUI)
• Click on the “CALL” icon on the GUI, dial/flash any number of your choice to immediately activate your Glo prepaid SIM
• Click on the “USSD/SELF CARE” icon on the GUI, to input the recharge card PIN ( Do this without "#" or "*") one at a time in the “INPUT RECHARGE CODE” area and left click on the “ACTIVATE/RECHARGE” button.
• Just Repeat this process until you recharge the account with the corresponding amount of the package of your choice. Close the box when you are done.
• Click on the “TEXT” icon on the GUI; select the first envelope-like icon with a blue label.
• On “SEND TO” field, type "127" and then type the appropriate plan code (10 or 11 or 12 etc.) in the body. Click “SEND” button
• Afer a while you will receive an SMS that shows that your subscription was successful
• Click on the "VIEW" button to grab full details of your subscribed plan.
• Click on the “CONNECT” icon on the “TASK BAR”
• Ensure the “PROFILE NAME” is set at “GLO 3G PLUS (PREPAID)”
• Click on the “CONNECT” button, once the green and the red arrows come up, you can then open your internet browser and "RULE YOUR WOLRD”!,

RELATED POST: HOW TO UNLOCK YOUR GLO BOLT MODEM

TO CHECK YOUR GLO SUSCRIPTION STATUS
Click on the “TEXT” icon on the Glo modem Software; select the first envelope-like icon with a blue label.
In the “SEND TO” field, type 127 and then type “INFO” in the body.
Click on the “SEND” button and it will display your subscription status.